CleanBold^TM Power Eraser is a compression of very fine fibers produced with a patented technology. CleanBold^TM Power Eraser can easily remove all kinds of dirt like a micro vacuum cleaner by wetting with water.

The micro fibers of CleanBold™ Power Eraser can remove dirt from all hard surfaces without having to use any detergent. A normal sponge is much less compressed, so in order to clean and remove dirt and stain, you always need to use powerful detergents or other cleaning agents such as sprays, scouring products and bleach products.

Life is dependent on application area. Smoother the surface is, longer it can be used and vice versa. It also depends on the amount of dirt, grime or stain marks on the surface. Once the dirt, grime or stain mark is removed, the surface area will become as clean as new.

Initial usage may be high due hard to remove dirt or grime. Once cleaned with the CleanBold, the surface becomes as clean as new and subsequent usage will drop significantly.

It is absolutely safe to use. Please read the caution statement on the pack carefully.

It can clean almost all types of surface except for polished wooden, fabric, rubber, high glossy areas or damaged due to chemical reaction or absorbed.

However, we still advice to test first on well lit, inconspicuous spot with light pressure. Let the spot dry to see if it is modified or change.

It is not a sponge. It is a cleaning pad made of melamine foam having three dimensional nano-structures. It does not leave behind any residue and makes the surface as clean as new. You can simply cut it with the help of knife according to your need for small or greasy areas. It is recommended to use warm water for cleaning greasy and oily surface for better results.

Please make sure that the cleaning pad is slightly moistened only (not dripping any water) for using on LCD, Laptop, printers and peripherals. Use dry clean cloth to wipe the surface with any left over water.

No, not at all. All you need is a little bit of water.